Umshini Wokukhiqiza I-Transformer-Umshini wokugoqa wephepha le-Double wire crawler traction

Umshini Wokukhiqiza I-Transformer-Umshini wokugoqa wephepha le-Double wire crawler traction-SPL- power transformer, distribution transformer, oil immersed transformer, dry type transformer, cast coil transformer, ground mounted transformer, resin insulated transformer, oil cooled transformer, substation transformer, switchgear

Ukugoqa kwephepha lokudonsa le-double crawler umshini

Have been tested by us for 7 years to be the most cost-effectirve among different modles of Double wire crawler traction paper wrapping machines. We can help you to derease the risk of transformer yokukhiqiza ukukhethwa kwemishini, ikakhulukazi ifektri entsha ye-transformer.

izincazelo

1. Machine name: double wire crawler traction paper wrapping machine.

2. Operation method: When the operator stands on the front of the machine: 1. Feed in with the right hand and discharge with the left hand, that is, pay off the wire on the right hand side and take up the wire on the left hand side. 2. The material is fed by the left hand, and the material is discharged by the right hand, that is, the wire is unwound on the left hand side and the wire is taken up on the right hand side.

3. Ukucaciswa kwezintambo zokuphakela:

Width: 2.5-14mm Thickness: 1-5mm

Indawo ye-cross-sectional: 5-60mm2.

4. Specifications of insulating paper:

Ubukhulu: 0.05—0.075mm

Ububanzi: 10-30mm

5. Izidingo zokugoqa:

5.1 Taping direction: when wrapping a single wire, one wrapping head rotates in one direction, and the other wrapping head can wrap in the opposite direction or in the same direction.

5.2 Indlela yokugoqa: ukugoqa komthungo; ukugoqa okugqagqene: ububanzi bungu-0-65%. I-Pitch drift ≤±0.2mm.

6. Inkokhelo: (ngokwezidingo zekhasimende)

6.1 Kunamaqoqo ama-2 amafreyimu okukhokha.

6.2 Uhlobo lohlaka olukhokhayo: ipulley yebhande. Inkokhelo ye-belt damping, idiski yokuphakamisa ngesandla

7. Straightening device: 2 sets

7.1 The number of guide wheels on each plane: 5 horizontal and 5 vertical.

7.2 Ububanzi besondo lomhlahlandlela: 30mm

8. Ikhanda lokusonga ngocingo olulodwa: amasethi ama-2

8.1 Ubuningi bekhava yothuli: isethi ngayinye yamakhanda asongayo inesembozo esiyisivikelo esinokukhanya okuthambile ngaphakathi.

8.2 Inani lamakhanda asonga ngocingo olulodwa esembozweni sothuli esifanayo: 2, elinye lamakhanda asongayo lingahlehliswa, kanti elinye lingajikiswa liye phambili, lihlehliswe futhi limiswe.

8.3 Ukuma kwekhanda ngalinye lokugoqa ngocingo: evundlile

8.4 Ububanzi bethreyi yephepha: ububanzi obungaphandle buyi-280mm, ububanzi bangaphakathi bungu-75mm

8.5 Inani lamathreyi ephepha ekhanda ngalinye lokugoqa: izingcezu ezi-2, kuze kufike kumakhasi ama-2 ephepha angasongwa.

8.6 Indlela yokuhlanganisa ithreyi: locknut

8.7 Tray position: 2 on the same plane, 4 pieces in total

8.8 Kukhona ipuleti lokucindezela emnyango nasekuphumeni kwekhanda ngalinye lokugoqa, elicindezela ucingo ukuvimbela ucingo ukuthi lungagxumi phakathi nokusebenza okuvamile.

8.9 Ukulungiswa kokuqina kokugoqa: inadi lesandla lebhande elimanzi lingalungiswa.

8.10 Ukulungiswa Kwe-Angle: Induku Yomhlahlandlela

8.11 Isikhala sokugoqa somphetho: ≤±0.2mm Ibanga lokugoqa eligqagqene: 0-65%

8.12 Self-locking seam wrapping: Yes

8.13 Isimiso sokunqanyulwa kwephepha: iswishi ye-mechanical break break

8.14 Lapho iphepha liphuka ngokuzumayo ngesivinini esikhulu somugqa, ibanga elihambayo lentambo: S≤200mm

8.15 Inani lamaswishi ekhefu lephepha ekhanda ngalinye eligoqayo: ithreyi ngalinye lineswishi yekhefu lephepha

8.16 Impahla yawo wonke amasondo omhlahlandlela axhumene nephepha: insimbi engagqwali noma inayiloni

8.17 induku yokuxhuma: kulula ukuhamba

8.18 Power transmission: each group of wrapping heads is driven by synchronous belt

8.19 Ijubane elilinganiselwe lekhanda eligoqayo: 550RPM ekugoqeni kwezendlalelo ezimbili.

9. Idivayisi yokudonsa: amasethi ama-2