famaritana

1. Anaran’ny milina: milina famonosana taratasy crawler roa sosona.

2. Operation method: When the operator stands on the front of the machine: 1. Feed in with the right hand and discharge with the left hand, that is, pay off the wire on the right hand side and take up the wire on the left hand side. 2. The material is fed by the left hand, and the material is discharged by the right hand, that is, the wire is unwound on the left hand side and the wire is taken up on the right hand side.

3. Famahana tariby famaritana:

sakany: 2.5-14mm Haavony: 1-5mm

Faritra midadasika: 5-60mm2.

4. Famaritana ny taratasy insulating:

Haavo: 0.05-0.075mm

Ambainy: 10-30mm

5. Fepetra takiana:

5.1 Taping direction: when wrapping a single wire, one wrapping head rotates in one direction, and the other wrapping head can wrap in the opposite direction or in the same direction.

5.2 Wrapping method: seam wrapping; overlapping wrapping: the range is 0-65%. Pitch drift ≤±0.2mm.

6. Pay-off: (according to customer requirements)

6.1 Misy karazany 2 amin’ny rafitra fandoavam-bola.

6.2 Karazam-baravarana karama: pulley fehikibo. Fandoavana fehin-kibo, kapila manainga tanana

7. Fitaovana fanitsiana: 2 seta

7.1 Ny isan’ny kodiarana mpitari-dalana isaky ny fiaramanidina: 5 mitsivalana ary 5 mitsangana.

7.2 Guide wheel diameter: 30mm

8. Loha famonosana tariby tokana: andiany 2

8.1 Habetsan’ny fonon’ny vovoka: misy sarony fiarovana misy jiro malefaka ao anatiny.

8.2 Ny isan’ny lohany famonosana tariby tokana ao anatin’ny fonon’ny vovoka iray ihany: 2, azo avadika ny iray amin’ireo lohan’ny famonosana, ary ny iray kosa azo avadika, avadika ary ajanona.

8.3 Ny toeran’ny lohan’ny tariby tsirairay: mitsivalana

8.4 Savaivony lovia taratasy: savaivony ivelany 280mm, savaivony anatiny 75mm

8.5 The number of paper trays on each wrapping head: 2 pieces, up to 2 sheets of paper can be wrapped.

8.6 Fomba fametahana lovia: locknut

8.7 Tray position: 2 on the same plane, 4 pieces in total

8.8 Misy takelaka fanerena eo amin’ny fidirana sy ny fivoahana isaky ny loha mifono, izay manindry ny tariby mba hisorohana ny tariby tsy hitsambikina mandritra ny fandidiana mahazatra.

8.9 Fanitsiana ny hamafin’ny famonosana: azo amboarina ny voanjo tanana tànana.

8.10 Fanitsiana zoro miolikolika: Roda mpitari-dalana

8.11 Ny elanelan’ny fametahana seam: ≤ ± 0.2mm Fifandonana mifanipaka: 0-65%

8.12 Famonosana zaitra manidy tena: Eny

8.13 Fitsipika fahatapahan’ny taratasy: fametahana taratasy mekanika

8.14 Rehefa tapaka tampoka ny taratasy amin’ny hafainganam-pandeha ambony indrindra, ny halaviran’ny tariby: S≤200mm

8.15 Number of paper break switches on each wrapping head: each tray has a paper break switch

8.16 Fitaovan’ny kodiaran’ny mpitari-dalana rehetra mifandray amin’ny taratasy: vy tsy misy pentina na nylon

8.17 tsorakazo mampifandray: mora mihetsika

8.18 Fifindran’ny hery: ny tarika tsirairay amin’ny lohan’ny fonony dia entin’ny fehikibo synchronous

8.19 Rated speed of wrapping head: 550RPM for two-layer wrapping.

9. Fitarihana fitaovana: 2 sets

9.1 Sakan’ny fehin-kibo: 40mm

9.2 Ny halavan’ny fifandraisana: 250mm

9.3 Conveyor fehikibo fitaovana: thickened synchronous fehikibo

9.4 Fisokafana ambony indrindra eo anelanelan’ny fehikibo: 30mm

9.5 Wire speed: 1-12m/min, mainly depends on wire gauge and wrapping pitch

9.6 Traction synchronous fehikibo: ny fitaovana synchronous mifandray mekanika

9.7 Adjustment method: Manual screw loose or tight

10. Fitaovana fandraisana; 2 sets (araka ny takian’ny mpanjifa)

11.1 Karazana: torque motor take-up

11.2 Wooden plate clamping: manual screw rod clamping

11.3 Fananganana takelaka hazo: tsora-kazo elektrika

11.4 Fihodinana kapila hazo: maotera torsi

11. Switchboard hery: 8KW

12. Fitaovana fanaraha-maso elektrika: 2 seta

13.1 Ny niandohan’ny fitaovana fampifandraisana elektrika: Chint

13.2 Inverter: VEICHI

13.3 Motor lehibe: Shanghai Dedong Motor

13.4 Famatsiana malefaka: 380V 3 phase

13. Haben’ny tany: 14m * 1.6m (lavany * sakany, tsy misy ny toerana miasa)