kwatancin

1. Machine Name: biyu waya crawler gogayya takarda wrapping inji.

2. Hanyar aiki: Lokacin da ma’aikaci ya tsaya a gaban na’ura: 1. Ciyar da hannun dama kuma a zubar da hannun hagu, wato, biya waya ta hannun dama kuma ya ɗauki waya a kan wayar. gefen hagu. 2. Ana ciyar da kayan ta hannun hagu, kuma kayan ana fitar da su ta hannun dama, wato, waya ba ta da rauni a gefen hagu kuma ana ɗaukar waya a gefen dama.

3. Bayanin ciyarwar waya:

Nisa: 2.5-14mm Kauri: 1-5mm

Yankin giciye: 5-60mm2.

4. Takaddun bayanai na insulating takarda:

Kauri: 0.05-0.075mm

Width: 10-30mm

5. Bukatun nade:

5.1 Taping direction: lokacin nannade waya guda daya, kan nannade daya yana jujjuyawa a waje daya, dayan nannade na iya nannade ta wata hanya ta daban ko ta hanya daya.

5.2 Hanyar nannade: suturar sutura; Rufe mai rufi: kewayon shine 0-65%. Matsakaicin tsayi ≤± 0.2mm.

6. Biyan kuɗi: (bisa ga buƙatun abokin ciniki)

6.1 Akwai saiti 2 na firam ɗin biyan kuɗi.

6.2 Nau’in firam ɗin biyan kuɗi: bel. bel damping biya-kashe, da hannu dagawa diski

7. Na’urar daidaitawa: 2 sets

7.1 Adadin ƙafafun jagora akan kowane jirgin sama: 5 a kwance da 5 a tsaye.

7.2 Jagoran dabaran diamita: 30mm

8. Single waya nade shugaban: 2 sets

8.1 Yawan murfin ƙura: kowane saitin kan nannade yana da murfin kariya tare da haske mai laushi a ciki.

8.2 Adadin kawuna na nannade wayoyi guda ɗaya a cikin murfin ƙura ɗaya: 2, ɗaya daga cikin kuɗaɗen na iya juyawa, ɗayan kuma ana iya jujjuya gaba, juyawa da tsayawa.

8.3 Matsayin kowane shugaban naɗa waya: a kwance

8.4 Takarda tire diamita: waje diamita 280mm, ciki diamita 75mm

8.5 Adadin tiren takarda akan kowane shugaban nade: 2 guda, har zuwa zanen gado 2 ana iya nannade su.

8.6 Hanyar murɗa tire: locknut

8.7 Matsayin tire: 2 akan jirgin sama guda, guda 4 gabaɗaya

8.8 Akwai farantin matsewa a ƙofar shiga da fita na kowane kan nannade, wanda ke danne wayar don hana wayar yin tsalle yayin aiki na yau da kullun.

8.9 Daidaita maƙarƙashiya: Za’a iya gyara bandejin damping na goro hannun.

8.10 Daidaita kusurwar iska: sandar jagora

8.11 Biyu tazarar nannade kabu: ≤± 0.2mm Kewayen nannade: 0-65%

8.12 Kundin kabu mai kulle kai: Ee

8.13 Ka’idar karya takarda: canjin karya takarda na inji

8.14 Lokacin da takarda ta karye ba zato ba tsammani a matsakaicin saurin layin, waya tana motsawa: S≤200mm

8.15 Adadin masu jujjuyawar takarda akan kowane kan nade: kowane tire yana da maɓalli na karya takarda

8.16 Abubuwan duk ƙafafun jagora a cikin hulɗa da takarda: bakin karfe ko nailan

8.17 sandan haɗin gwiwa: sauƙin motsawa

8.18 Watsawar wuta: kowane rukuni na kawuna na nannade ana sarrafa su ta hanyar bel na aiki tare

8.19 Matsakaicin saurin kai na nadi: 550RPM don nadi mai Layer biyu.

9. Na’urar jan hankali: 2 sets

9.1 Nisa mai ɗaukar bel: 40mm

9.2 Tsawon tuntuɓa: 250mm

9.3 Abun jigilar bel: bel mai kauri

9.4 Matsakaicin buɗewa tsakanin bel: 30mm

9.5 Waya gudun: 1-12m/min, yafi dogara da waya ma’auni da kuma nada farar

9.6 Ƙarƙashin bel ɗin aiki tare: na’urar daidaitawa tana haɗe da inji

9.7 Hanyar daidaitawa: Manual dunƙule sako-sako da ko m

10. Na’urar ɗauka; 2 sets (bisa ga bukatun abokin ciniki)

11.1 Nau’in: Karɓar Motoci

11.2 Maƙerin farantin katako: sandar dunƙule ta hannu

11.3 Katako dagawa farantin: electromechanical dunƙule sanda

11.4 Jujjuya diski na katako: injin juzu’i

11. Wutar lantarki: 8KW

12. Na’urar sarrafa wutar lantarki: 2 sets

13.1 Asalin na’urar haɗin wutar lantarki: Chint

13.2 Mai juyawa: VEICHI

13.3 Babban Mota: Motar Shanghai Dedong

13.4 Samfuran ƙarfin lantarki: 380V 3 lokaci

13. Girman ƙasa: 14m * 1.6m (tsawon * nisa, ba tare da wurin aiki ba)