Ana amfani da bushing na na’urar taswirar wutar lantarki don archa manyan igiyoyin wutar lantarki na ciki da ƙananan wutar lantarki daga cikin tankin mai, wanda ba wai kawai yana taka rawa ba na ƙaddamar da igiyoyi masu ɓoye, amma kuma yana taka rawar gyara igiyoyi. power transformer bushing yana daya daga cikin abubuwan da ke dauke da kayan aikin wuta. A cikin aiwatar da aiki, nauyin halin yanzu yana wucewa na dogon lokaci. Lokacin da gajeriyar da’ira ta faru a wajen na’ura mai ba da wutar lantarki, gajeriyar da’ira ta wuce. Don haka, ana gabatar da buƙatu masu zuwa don keɓancewar na’urar transfoma:

(1) Dole ne ya sami ƙayyadaddun ƙarfin lantarki da isasshen ƙarfin inji.

(2) Dole ne ya sami kwanciyar hankali mai kyau na thermal kuma ya iya jure yawan zafin jiki na wucin gadi yayin gajeren kewayawa.

(3) Ƙananan bayyanar, ƙananan inganci, kyakkyawan aikin hatimi, haɓaka mai ƙarfi da kulawa mai dacewa.

HV, LV da tsaka-tsakin bushings na masu canza wuta sune bushing capacitor na takarda. Babban ƙarfin wutar lantarki na tsarin flange biyu ne. Ana amfani da flange ɗaya don shigar da bushing a saman na’urar, ana amfani da flange na biyu don haɗa bututun bututun SF6, kuma ana zana soket ɗin gwajin capacitor tsakanin flanges biyu. Babban ɓangaren an rufe shi a cikin bututun SF6. An haɗa hanyar fita daga cikin shingen zuwa tashar bas na tashar SF6.

Ƙarƙashin ƙarancin wutar lantarki na na’ura mai ba da wutar lantarki an haɗa shi da rufaffiyar motar bas a gefen ƙananan ƙarfin lantarki, kuma haɗin da ke tsakanin su biyu shine haɗi mai laushi.

Ana haɗa tasfomai masu ɗai-ɗai guda uku ta hanyar tsaka-tsakin tsaka-tsaki don samar da tsaka-tsakin tsaka-tsakin bankin taransfoma, kuma tsakar tsakar rana tana kan ƙasa kai tsaye ta hanyar taranfoma na yanzu a ɗakin B.