மின்மாற்றியின் பெயர்ப் பலகையில் உள்ள மதிப்பீட்டின் பொருள் என்ன?

தி மதிப்பிட்டவை மின்மாற்றியின் மதிப்பு என்பது மின்மாற்றியின் இயல்பான பயன்பாட்டிற்காக மின்மாற்றி உற்பத்தியாளரால் செய்யப்பட்ட ஒழுங்குமுறை ஆகும். குறிப்பிட்ட நேரத்தில் மின்மாற்றியின் செயல்பாடு மதிப்பிட்டவை மதிப்பு மின்மாற்றியின் நீண்டகால நம்பகமான செயல்பாட்டை உறுதிசெய்து நல்ல செயல்திறனைக் கொண்டிருக்கும். அதன் மதிப்பீடு பின்வரும் அம்சங்களை உள்ளடக்கியது:

மின்மாற்றியின் பெயர்ப் பலகையில் உள்ள மதிப்பீட்டின் பொருள் என்ன?-SPL- power transformer, distribution transformer, oil immersed transformer, dry type transformer, cast coil transformer, ground mounted transformer, resin insulated transformer, oil cooled transformer, substation transformer, switchgear

1. மதிப்பிடப்பட்ட திறன்: இது வோல்ட் ஆம்பியர்ஸ் (VA), கிலோவோல்ட் ஆம்பியர்ஸ் (kVA) அல்லது மெகாவோல்ட் ஆம்பியர்ஸ் (MVA) ஆகியவற்றில் வெளிப்படுத்தப்படும் மதிப்பிடப்பட்ட நிலையின் கீழ் மின்மாற்றியின் வெளியீட்டுத் திறனின் உத்தரவாத மதிப்பாகும். மின்மாற்றி அதிக செயல்பாட்டுத் திறனைக் கொண்டிருப்பதால், முதன்மை மற்றும் இரண்டாம் நிலை முறுக்குகளின் மதிப்பிடப்பட்ட திறன் வடிவமைப்பு மதிப்புகள் பொதுவாக ஒரே மாதிரியாக இருக்கும்.

2. Rated voltage: refers to the guaranteed value of the terminal voltage of the transformer at no-load, expressed in volts (V) and kilovolts (kV). Unless otherwise specified, rated voltage refers to line voltage.

3. Rated current: line current calculated from rated capacity and rated voltage, expressed in amperes (A).

4. சுமை மின்னோட்டம் இல்லை: மின்மாற்றி சுமை இல்லாமல் செயல்படும் போது மதிப்பிடப்பட்ட மின்னோட்டத்திற்கான தூண்டுதல் மின்னோட்டத்தின் சதவீதம்.

5. Short circuit loss: the active loss when one side of the winding is short circuited and the other side of the winding applies voltage to make both sides of the winding reach the rated current, expressed in watts (W) or kilowatts (kW).

6. சுமை இழப்பு இல்லை: சுமை இல்லாத செயல்பாட்டின் போது மின்மாற்றியின் செயலில் உள்ள மின் இழப்பைக் குறிக்கிறது, இது வாட்ஸ் (W) அல்லது கிலோவாட்களில் (kW) வெளிப்படுத்தப்படுகிறது.

7. Short circuit voltage: also known as impedance voltage, it refers to the percentage of the voltage applied when one side of the winding is short circuited and the other side of the winding reaches the rated current and the rated voltage.

8. Connection group: it refers to the connection mode of the primary and secondary windings of the transformer and the phase difference between line voltages, expressed in clock.

மின்மாற்றியின் பெயர்ப் பலகையில் உள்ள மதிப்பீட்டின் பொருள் என்ன?-SPL- power transformer, distribution transformer, oil immersed transformer, dry type transformer, cast coil transformer, ground mounted transformer, resin insulated transformer, oil cooled transformer, substation transformer, switchgear